Not the pretties prop I’ve ever made but Hade’s outfit was pretty simple, grey skin, yellow eyes, blue hair and a scull pin. I was going to keep it clean and neat but then I figured that since we are talking about the god of the underworld I’d scuff it up a little.
Making this is simple, just a little clay, some sculpting tools and a little bit of paint
I used some white modeling clay (**) at first, rolled it into an oval shape and then flattened it a little. Next take a sculpting tool (you can use the rounded end of a pen or a cocktail stick if that’s all you have to hand) and mark out the shape of the eyes and teeth.
Once you have cut off the sides next to the teeth and round the edges, just go over everything and neaten it up. Push the eye sockets a little deeper, sharpen the lines on the teeth and then just wait for it to dry.
Once the clay has dried you can paint it with several different mediums
You could do a wash over it with black or brown ink so that the colour settles in the cracks and sockets. You could also use acrylic paint or water colour (which is what I used) or even spray paint. Once I’d painted over it I brushed a nail file over the surface to roughen it up a little.
The last thing I did was glue gun a little loop of ribbon at the back so that I could pin it to my shoulder, you might also need to superglue it down a little so it doesn’t unstick from the clay. Especially if the clay is quite heavy, it can have a little trouble sticking to the hot glue since the surface isn’t very porous.